choose language

Please, make sure to read the important information article.

 

 

Setting up BPM Connect Pro

 

  1. Press the button of BPM Connect Pro to turn it on.
  2. The LED of BPM Connect Pro will light up blue and a "SETUP" animation will appear on the display.
  3. The monitor will automatically set itself up for us.
  4. Once the monitor displays a Green Check Mark, setup is complete!

 


 

Take your first measurement

 

Please refer to the guidelines below to take a measurement:

  1. Sit in a comfortable position where you have access to a table or armrest.
  2. Unroll the cuff. Place your left arm inside it.
  3. Tighten the cuff around your arm, the tube should be positioned against your inner arm.
  4. Place your arm on a table or armrest and ensure that it is level with your heart.
  5. Turn on your blood pressure monitor to start the measurement.

    Note: You can select a single or triple measurement ('BPx3' will appear on the display) with a long press on the button and press the button again to start the measurement.

If an ERROR message appears on the screen, please refer to the troubleshooting methods described on this page.

Was this article helpful?

Didn't find what you need? Here's how to get in touch.

Contact us
To preserve the Withings Forum as a place of kindness, mutual support, and interest for the products and services provided by Withings, I am committed to:
  • Be courteous and participate in the community with a spirit of friendliness and understanding
  • Respect all users on the forum
  • Avoid controversy or quarrel
  • Ensure that my messages do not infringe on the rights, reputation, image, or privacy of others
  • Avoid any and all discussions which contain insulting or discriminatory comments
  • Abide by the full terms and conditions outlined here

If you need assistance because of an issue which would not be resolved through troubleshooting, such as a product with physical damage, please contact our Support Team.