Please, make sure to read the important information article.

Set up BPM Connect

Beforehand, make sure your provider's app has been previously downloaded on your mobile device.

Open the app and follow the instructions on the screen.

Once asked, press the button on BPM Connect and wait for the blood pressure monitor to set up.

BPM Connect will turn on and sync.

Both the monitor and the will let you know the setup is successful, which means you're all set!

Take your first measurement

Please refer to the guidelines below to take a measurement:

1. Sit in a comfortable position where you have access to a table or armrest.
   
2. Unroll the cuff. Place your left arm inside it.
   
3. Tighten the cuff around your arm, the tube should be positioned against your inner arm.
   
4. Place your arm on a table or armrest and ensure that it is level with your heart.
   
5. Turn on your blood pressure monitor to start the measurement.
   
   You can select a single or triple measurement with a long press on the button and press the button again to start the measurement.

If an ERROR message appears on the screen, please refer to the troubleshooting methods described on this page.