choose language

Your iGlucose Meter comes with an installed lithium rechargeable battery. When fully charged, this battery will provide power to perform approximately 500 tests under normal use. Below are instructions on how to charge your battery. 

Charging the battery

  1. Connect the meter charger to the mini usb port on the bottom of the meter.
  2. Plug the charger into a power outlet. When the unit begins to charge, the screen illuminates, a blue light appears above the screen, a charging battery icon appears on the screen along with the message “Charging. Cannot Perform Glucose Test”. The blue light remains on while charging continues. It may take 2-3 hours to fully charge. 
  3. When charging is complete, the battery icon on the device screen appears solid green.
  4. Before using, unplug the charger from the power outlet and from the meter. 

If you experience any issues relating to battery charging, please reach out to Customer Service by clicking the Contact us button at the bottom of the page.

Was this article helpful?

Didn't find what you need? Here's how to get in touch.

Contact us
To preserve the Withings Forum as a place of kindness, mutual support, and interest for the products and services provided by Withings, I am committed to:
  • Be courteous and participate in the community with a spirit of friendliness and understanding
  • Respect all users on the forum
  • Avoid controversy or quarrel
  • Ensure that my messages do not infringe on the rights, reputation, image, or privacy of others
  • Avoid any and all discussions which contain insulting or discriminatory comments
  • Abide by the full terms and conditions outlined here

If you need assistance because of an issue which would not be resolved through troubleshooting, such as a product with physical damage, please contact our Support Team.